LIST OF PRODUCTS: |
|
-MIXING SYSTEMS
|
-PASTEURISERS
|
-HEAT EXCHANGERS
|
-COOKING SYSTEMS
|
-VALVES, FILTERS AND FITTINGS
|
-FABRICATION
|
-PUMPS
|
-NEW PRODUCTS
|
| |
-ENVIRONMENTAL
|
Plate Heat Exchangers
The plate and frame type heat exchangers are the most efficient (UP TO 95% EFFICIENCY) and economical type of heat exchanger available on the market with compact space saving design. The standard material for flow plate is Stainless steel and, optional Titanium and other exotic materials are available as well. Sepak offers design, supply and installation of heat exchangers and heat exchange systems for applications such as
|
Water to water heating or cooling Heat recovery Pasteurizer for Milk, Wine and Juices Chilling of fluids (Glycol) Protection of High-value cooling and heating equipment Pressure breaker (buffer)
|
|
For more information, download our Plated Heat Exchangers Brochure!
DOWNLOAD NOW
Gasketed Plate Design
With the big range of plate heat exchangers SEPAK has got the optimal technical solution for any possible task, with connection sizes from Ø15 - Ø500 mm covering a liquid flow of 50 l/hour - 2000 m 3/hour.
The construction of the inlet part makes a perfect distribution of the liquids across the heating surface. The inlet part is increased and supplied with grooves preventing "dead spots" which may cause the growth of bacteria in the plate heat exchanger. The inlet with groves secures a strong inlet part with a minimum of contact points.
Brazed Plates
Contrary to the traditional plate heat exchanger the brazed plate heat exchanger does not contain rubber gaskets and can thus operate continously at the temperatures from minus 180 0 C up to plus 200 0 C. The operating pressure can be as high as 30 bar.
|
|
|
Counter Rotating Mixers
Sepak Industries design and manufacture counter-rotating mixers for mixing of viscous, non-Newtonian fluids in tanks and process vessels. Products such as conditioners, shampoo and tomato sauce can now be easily mixed, improving heating and process times. The mixers can be adapted to suit existing vessels or Sepak Industries can design and manufacture complete with purpose built process vessel. The mixers are manufactured with an anchor type outer stirrer and aerofoil type inner stirrers. The outer stirrer has Nylon scraper blades for scraping the vessel wall to prevent burn on in heated vessels, and to increase turbulence and heat transfer near vessel walls. Mixing speed, mixer type and blade profiles can be selected to suit specific applications or products, with many types available.
The mixer pictured to the right was fitted to an existing 7500 litre steam jacketed, vacuum vessel. Hard faced mechanical shaft seals were incorporated to allow the mixer and vessel to hold vacuum during the mixing process. A split mechanical seal was used on the outer shaft to minimize disassembly and downtime for seal face replacement. Our design also avoids any bolted shaft couplings within the vessel and all wetted parts are manufactured from 316 stainless steel. Our scraper design allows scrapers to be changed in minutes without the use of tools.
|
